Touch Screen Alignment

From QuickSCRIP Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Occasionally (most often due to a windows update), the POS touch screen will go out of alignment, and will require re-calibration for the touch feature to function. Follow these steps to re-calibrate your device.

1 Locate the ELO Touch Screen Icon

Icon will be located in the bottom right of the Windows System tray.

ELO Icon

2 Right Click Icon and Select 'Align' Option

This will begin an alignment test.

Icon Options

3 Touch the on-screen Targets

The Screen will turn blue. Three targets will appear in different corners of the screen. Touch them firmly with your finger. The green bar is a timer, and will cancel the alignment test if it fills up before the target is touched.

Example of alignment test

4 Touch the Green Checkmark

This will end the alignment test. Your POS touch screen should function normally after that.

Alignment test finished