Touch Screen Alignment
Occasionally (most often due to a windows update), the POS touch screen will go out of alignment, and will require re-calibration for the touch feature to function. Follow these steps to re-calibrate your device.
1 Locate the ELO Touch Screen Icon Icon will be located in the bottom right of the Windows System tray.
2 Right Click Icon and Select 'Align' Option This will begin an alignment test.
3 Touch the on-screen Targets The Screen will turn blue. Three targets will appear in different corners of the screen. Touch them firmly with your finger. The green bar is a timer, and will cancel the alignment test if it fills up before the target is touched.
4 Touch the Green Checkmark This will end the alignment test. Your POS touch screen should function normally after that.