POS Ingenico Device Gallery
The following is a reference image gallery for installation and troubleshooting of QuickPOS Signature Pads.
ISC 480
Note: The single HDMI connector plugs into the back of the pad (often secured with two screws). On the opposite end of the cable, a USB connection plugs into the POS register, along with the power cable connector.
Note: The HOST field indicates the connection type. Ideally, this should read USB-CDC.
LANE 8000
Note: The Lane 8000 connects to your POS using the same cable configuration as the ISC 480 (Pictured above).
Note: You must scroll down on the touch screen to see the Communication Type (Compare the first and second images). Ideally, this should read USB-CDC.