POS Ingenico Device Gallery

From QuickSCRIP Wiki
Jump to navigation Jump to search


The following is a reference image gallery for installation and troubleshooting of QuickPOS Signature Pads.

ISC 480

Front

Back

Note: The single HDMI connector plugs into the back of the pad (often secured with two screws). On the opposite end of the cable, a USB connection plugs into the POS register, along with the power cable connector.

Cables - Pad Connection

Cables - PC and Power

Note: The HOST field indicates the connection type. Ideally, this should read USB-CDC.

Startup Screen


LANE 8000

Note: The Lane 8000 connects to your POS using the same cable configuration as the ISC 480 (Pictured above).

Front

Back

Note: You must scroll down on the touch screen to see the Communication Type (Compare the first and second images). Ideally, this should read USB-CDC.

Startup Screen

Startup Screen